(11.56 € Excluding VAT. VAT at the legal rate applies.)
JIC 37° bulkhead union to take a line through a plate or a panel. S250 series, from 7/16" to 1.5/16".
Bulkhead union, S250 series, with JIC 37° connections, to take a hydraulic line through a steel plate, a tank wall or a panel. The body passes through the hole and is held to the plate by a nut; the female JIC hose fitting tightens on each side and seals on the 37° cone.
Sizes available: 7/16", 1/2", 9/16", 3/4", 7/8", 1.1/16" and 1.5/16".
Before ordering, check the JIC size and the plate thickness, which must fit within the threaded length. To identify the JIC size, measure the outside diameter of the male thread: about 11.1 mm for 7/16", 14.3 mm for 9/16", 19 mm for 3/4" and 22.2 mm for 7/8".
| Size | T | T1 | J | J1 | A | B | D | CH | CH1 | Catalogue ref. |
|---|---|---|---|---|---|---|---|---|---|---|
| 1/2" | 8 mm (5/16) | 8 mm (5/16) | 1/2-20 | 1/2-20 | 52.5 | 14 | 31.5 | 19 | 19 | A103002/08 |
| 3/4" | 12 mm (1/2) | 12 mm (1/2) | 3/4-16 | 3/4-16 | 62 | 17 | 37.5 | 24 | 24 | A103002/12 |
| 7/16" | 6 mm (1/4) | 6 mm (1/4) | 7/16-20 | 7/16-20 | 52.5 | 14 | 31.5 | 17 | 17 | A103002/06 |
| 7/8" | 14÷16 mm (5/8) | 14÷16 mm (5/8) | 7/8-14 | 7/8-14 | 69.5 | 19.5 | 41 | 30 | 30 | A103002/16 |
| 9/16" | 10 mm (3/8) | 10 mm (3/8) | 9/16-18 | 9/16-18 | 55.5 | 14 | 33.5 | 22 | 22 | A103002/10 |
Dimensions in mm (threads in inches). Source: FOR S.p.A., catalogue 1, Rev.9 (2017), p. 85. Empty cells: size not listed in the catalogue. The letters match the technical drawing.
Indicative information, as per the manufacturer’s catalogue. If in doubt, ask us to confirm the dimensions before ordering.
Are you an OEM? Reseller? Workshop?
No option matches the filters.