Subcategories

• 

  Eurofluid - Hydraulic...

  Eurofluid Cetop-pattern hydraulic manifolds: subplates, multi-station manifolds and NG6 and NG10 modular sandwich valves. For building power units with Cetop 3 and Cetop 5 solenoid valves.

  Technical guide: How to choose a hydraulic valve

• 

  Cetop 3 (NG6) valves

  Duplomatic DS3 Cetop 3 (NG6) directional solenoid valves, in a range of spool types and coil voltages, plus NG6 modular valves. ISO 4401-03 mounting pattern.

  Technical guide: How to choose a hydraulic valve

• 

  Cetop 5 (NG10) valves

  Duplomatic DS5 Cetop 5 (NG10) directional solenoid valves, in a range of spool types and coil voltages. ISO 4401-05 mounting pattern, for higher flows than NG6.

  Technical guide: How to choose a hydraulic valve

• 

  NEM - Cartridge valves

  NEM cartridge valves: relief, check, overcentre, flow control and solenoid valves, for CAV 08 and CAV 10 cavities. Specify the cavity and the pressure range you need.

  Technical guide: How to choose a hydraulic valve

• 

  Flow restrictors

  In-line unidirectional and bidirectional flow restrictors (VRF, VRFU, VRB, VRFB) and Tognella restrictors. The unidirectional type throttles one way and gives free flow the other.

  Technical guide: How to choose a hydraulic valve

• 

  Ball Valves

  High-pressure 2 and 3-way ball valves and 3, 4 and 6-way diverter valves, open or closed centre. For shutting off or diverting flow by hand.

  Technical guide: How to choose a hydraulic valve

• 

  End-of-stroke valves

  Mechanically operated end-of-stroke valves, normally open (VF-NA) or normally closed (VF-NC), and V-FCR versions. They cut or divert flow when the cylinder reaches the end of its stroke.

  Technical guide: How to choose a hydraulic valve

• 

  Relief valves

  In-line pressure relief valves, direct-acting and pilot-operated, VMP series, to protect the circuit from overpressure. Select by flow, thread and setting range.

  Technical guide: How to choose a hydraulic valve

• 

  Check valves

  In-line check valves (VU, RHD) and single and double pilot-operated check valves (VBPSE, VBPSL, VBPDE) for locking cylinders. The pilot-operated type only opens in reverse with pilot pressure.

  Technical guide: How to choose a hydraulic valve

• 

  Sequence Valves

  In-line and modular sequence valves (VSQAPP, VS2C, MSD) that bring in a second actuator once pressure reaches the set value. Select by pressure range and mounting type.

  Technical guide: How to choose a hydraulic valve

• 

  Overcenter Valves

  VBCD overcentre valves, single and double-acting, for controlling lowering and holding suspended loads on cylinders and motors. In-line, flanged and cylinder-mounted versions.

  Technical guide: How to choose a hydraulic valve

• 

  Flow Dividers

  DFL and V-EQ flow dividers that split flow between two actuators and synchronise their movement. Select by inlet flow and split ratio.

  Technical guide: How to choose a hydraulic valve

• 

  High-Low Valves

  VABP and VEP high-low unloading valves for double-pump circuits: they unload the low-pressure pump as pressure rises. Used on presses and log splitters.

  Technical guide: How to choose a hydraulic valve

• 

  Flow Regulators

  3-way pressure-compensated flow regulators (RFP3, VPR3) and Tognella flow control valves. They hold the set flow constant and return the excess to tank.

  Technical guide: How to choose a hydraulic valve

• 

  Other Valves

  Pressure reducing valves, shuttle valves, hose burst valves, regenerative circuit valves and rotary unions. In-line valves for specific circuit functions.

  Technical guide: How to choose a hydraulic valve

• 

  Coils

  Coils for Duplomatic solenoid valves and for cartridge valves, in 12 and 24 V DC and other voltages. Check the bore, length and voltage of the old coil.

  Technical guide: How to choose a hydraulic valve

• 

  Monoblock and...

  P40, P80 and P120 manually operated monoblock valves, Z50 electro-manual valves and 3-way rotary valves. Specify the number of sections and the spool type of each.

  Technical guide: How to choose a hydraulic valve

• 

  Connectors

  DIN 43650 connectors for solenoid valve coils: universal, with LED, with rectifier, and LED bases. The rectifier connector lets DC coils run on an AC supply.

  Technical guide: How to choose a hydraulic valve

• 

  Pressure intensifiers

  Pressure intensifiers that multiply circuit pressure by a fixed ratio, in in-line and Cetop 3 (NG6) mounting versions. Select by intensification ratio (for example 3.4, 4.0, 5.0 or 7.0).

• 

  Electronics and Joysticks

  MAP joysticks and levers, spring-return or friction-held, in industrial and marine versions, and Duplomatic digital amplifiers. For electrical control of proportional valves.

• 

  PVG16/PVG32

  Seal kits and manual actuators for Danfoss PVG 16 and PVG 32 proportional valves: PVE, PVM, PVMD and PVAS modules. Search by Danfoss part number (for example 157B3171).