Flanges
Hydraulic flanges for connecting tube and hose to pumps, motors, manifolds and valves with large flows: SAE 3000 and SAE 6000 weld-on and threaded, straight and 90°. There are also RF, RD, RG and RGB flanges and flange O-rings. A flange connects without a…
Read moreHydraulic flanges for connecting tube and hose to pumps, motors, manifolds and valves with large flows: SAE 3000 and SAE 6000 weld-on and threaded, straight and 90°.
There are also RF, RD, RG and RGB flanges and flange O-rings. A flange connects without a thread: a face with an O-ring sits against the face of the pump or manifold and is held by four bolts. It is the connection used from about 3/4" and at the highest pressures, where a thread would be too large or would not hold.
The two SAE J518 (ISO 6162) series:
- SAE 3000 (code 61): medium pressures; for the same size, a smaller bolt pattern;
- SAE 6000 (code 62): high pressures, with thicker flanges and larger bolts.
The two series are not interchangeable: check the distance between the holes and the face diameter. The size (1/2", 3/4", 1", 1.1/4"...) refers to the nominal bore, not an outside dimension.
When fitting, replace the O-ring and tighten the four bolts evenly in a cross pattern. Flange fittings that crimp directly onto the hose are under Hose fittings, and the guide How to identify hose fittings has a flange identifier by dimensions.
Technical guide: How to identify hose fittings
Technical guide: SAE flanges 3000 and 6000 (code 61 and 62): how to identify and measure them
Are you an OEM? Reseller? Workshop?