Subcategories

• 

  Wipers

  The wiper of the hydraulic cylinders has the function of preventing the entry of dust and other residues inside:

  • Single wiper
  • Double wiper
  • Metal case wiper

  Technical guide: How to choose a hydraulic seal

• 

  Rod Seals

  Rod seals are used in the hydraulic cylinder to prevent fluid loss to the outside:

  • Vulkolan Seals
  • PTFE Seals
  • Chevron

  Technical guide: How to choose a hydraulic seal

• 

  Piston Seals

  Piston seals are used to retain the passage of oil between the inner chambers of the hydraulic cylinder:

  • Double-acting piston seals
  • Vulkolan seals
  • PTFE seals
  • Chevron

  Technical guide: How to choose a hydraulic seal

• 

  Guides

  The guides reduce the friction of the moving parts of the hydraulic cylinder and prevent contact between metal parts:

  • Pre-formed guides
  • PTFE guide tape
  • Resin guide tape

  Technical guide: How to choose a hydraulic seal

• 

  O-rings

  The O-rings can be used as a static (preferential) or dynamic seal:

  • O-rings NBR
  • O-rings VITON
  • NBR cord
  • VITON cord

  Technical guide: How to choose a hydraulic seal

• 

  Backup rings

  The rings are used alongside the o-rings to prevent their extrusion due to a large clearance or in the presence of high pressures.

  The ring should be placed on the opposite side of the pressure, using two rings when the o-ring is subjected to pressure on both sides.

  Technical guide: How to choose a hydraulic seal

• 

  Shaft Seals

  Seals have the sealing and protection effect against the entry of impurities in a rotating shaft:

  • NBR Seals
  • Vulkolan Seals
  • VITON Seals
  • Pressure Seals

  Technical guide: How to choose a hydraulic seal

• 

  PTFE seals

  PTFE rod and piston seals for low friction, high speeds and high temperatures in hydraulic cylinders. If you cannot find the size, send us the housing dimensions.

  Technical guide: How to choose a hydraulic seal

• 

  Bonded seals

  Other seals for various applications:

  • Usits for bushings
  • Seals for SAE flanges

  Technical guide: BSP and NPT threads: how to identify them

  Technical guide: How to choose a hydraulic seal

• 

  Seal Kits

  Seal kits for M+S motors, B&C pumps and Danfoss PVG 32 valves (PVE, PVM, PVAS), ready for the repair job. Check the equipment model before ordering.

  Technical guide: How to choose a hydraulic seal

• 

  Protective Covers

  Polyethylene caps and plugs that protect male and female BSP threads from knocks and dirt in transport and storage. Available in the most common BSP sizes.

• 

  Adhesives and Silicones

  Loxeal medium and high-strength threadlockers, flange sealants, bearing retainer and gasket silicone. For assembling and maintaining hydraulic circuits.