Dual electronic pressure switch (0-400 bar) IO-Link + 4-20 mA/0-10 V: TSE3-D-400-2-1

The Argo-Hytos TSE3-D measures pressure with a thin-film metal cell and does two things: it gives a switching signal when the pressure reaches the set value and, on the second output, it can give an analogue 4-20 mA or 0-10 V signal. The first output also works as IO-Link, for connection to a PLC with setup and diagnostics over the network.

The 4-digit display changes between red and green, so you can see at a glance whether the pressure is inside or outside the window, and the buttons allow programming on the device itself: hysteresis or window, NO or NC contacts, delays, damping and unit (bar, psi or MPa). The top part rotates 345° to orient the connector.

• Measuring range: 0 to 400 bar; withstands 800 bar overpressure
• Hydraulic connection: G 1/4 male thread with FKM sealing ring
• Electrical connection: 4-pin M12x1 connector (the female connector is sold separately)
• Supply: 18 to 30 V DC; IP65 and IP67 protection
• Stainless steel body; fluid from -25 to +80 °C