(8.3 € Excluding VAT. VAT at the legal rate applies.)
45° elbow with a male JIC 37° end and a female JIC nut of the same size, to turn a JIC connection. S690 series, from 7/16" to 1.5/8".
45° elbow, S690 series, with a male JIC end on one side and a female JIC nut on the other, in the same size. It fits between a male JIC end (on an adapter, a manifold or a valve) and the hose fitting, to turn the hose without forcing it.
The JIC connection seals metal to metal on the 37° cone, with no O-ring or washer; the cones must be clean and free of scratches.
Sizes available: 7/16", 1/2", 9/16", 3/4", 7/8", 1.1/16", 1.5/16" and 1.5/8".
To identify the JIC size, measure the outside diameter of the male thread: about 11.1 mm for 7/16", 14.3 mm for 9/16", 19 mm for 3/4" and 22.2 mm for 7/8".
| Size | T | J | J1 | B | C | CH | Catalogue ref. |
|---|---|---|---|---|---|---|---|
| 3/4" | 12 mm (1/2) | 3/4-16 | 3/4-16 | 25 | 32 | 22 | A105004/12 |
| 7/16" | 6 mm (1/4) | 7/16-20 | 7/16-20 | 18 | 24.5 | 14 | A105004/06 |
| 7/8" | 14÷16 mm (5/8) | 7/8-14 | 7/8-14 | 28 | 37 | 27 | A105004/16 |
| 9/16" | 10 mm (3/8) | 9/16-18 | 9/16-18 | 21 | 29.5 | 17 | A105004/10 |
| 1/2" | 8 mm (5/16) | 1/2-20 | 1/2-20 | 19.5 | 26.5 | 17 | A105004/08 |
| 1.5/8" | 30-32 mm (1"1/4) | 1"5/8-12 | 1"5/8-12 | 40.5 | 51.5 | 50 | A105004/32 |
Dimensions in mm (threads in inches). Source: FOR S.p.A., catalogue 1, Rev.9 (2017), p. 89. Empty cells: size not listed in the catalogue. The letters match the technical drawing.
Indicative information, as per the manufacturer’s catalogue. If in doubt, ask us to confirm the dimensions before ordering.
Are you an OEM? Reseller? Workshop?
No option matches the filters.